De Sisti Batten Hoist

FEATURES

• SAFETY The BATTEN HOIST (with Circuits) complies with all safety standards set forth by the 
Internationally recognized testing authorities of VBG 70 and by UL laboratories standards. These standards are directly associated with the safety of suspensions systems mounted above an assembly of people. The safety features incorporated into the BATTEN HOIST include, a self sustaining worm-geared set motor to prevent back winding in a static position and backed up by a breaking system when moving. The system also includes two safety micro switches, one for the top limit plus an extra emergency safety switch and one for the bottom limit plus an extra emergency safety switch. Each wire rope has overload sensors and slack line detection. 

• FLEXIBILITY The BATTEN HOIST can be specified in lengths from 20’ (6 meters) up to 48’ (14.6 meters) and can carry loads up 550 lbs (250kg) OR 1000 lbs (456 kg). The BATTEN HOIST (with Circuits) can carry either a connector strip with up to 12 – 20 amp circuits and DMX or a connector strip with up to 36 – 20 amp circuits and DMX. The hoist is ideal for the raising and lowering of lighting instruments along with their associated circuits and dimmers in a Theatrical or Architectural application where a long span 
with circuits is needed. The BATTEN HOIST can provide up to 48’ of pipe batten, Rail or Unistrut for mounting either Theatrical or Architectural lighting instruments along with up to 36 - 20amp circuits, DMX in /out, Ethernet, 3 phase circuits for intelligent lights, or audio/ video outlets. The flexibility, ease of installation and the length of the batten it carries, makes it an ideal product for STAGE or ARCHITECTURAL APPLICATIONS. This is especially true, where a long span needs to be covered. For instance, for lowering HOUSELIGHT FIXTURES, where a few circuits are required and small loads but with long spans.

• MECHANICAL The mechanical design incorporates four components. A motor compartment, under hung from the steel, houses a 1.8 kw motor (light duty version) or a 2.8 kw motor (heavy duty version),terminals for the 3 Phase 208 volt power feed, the control circuits and load circuit terminals that feed either one or two folding trays (depending on the number of circuits) that carry the circuits to a connector strip. The STEEL WIRE DIVERTER MODULE 
MOTORIZED WINCH MODULE second element is a single line diverter pulley module supporting the wire ropes, the number varying depending on the length of the batten. The third are flip-flop trays (the cable management system) that carry the circuits to the connector strip, which in turn supports the pipe batten, rail or Unistrut for the lighting instruments. This allows for easily handling and quick installation. The main components are all pre-wired from the factory making the installation an easy task. The special cable management system makes the load circuit handling neat and easily managed when the hoist is raised or lowered. 

• OPERATIONAL The BATTEN HOIST is capable of lifting a (SWL) safe working load of 550 lbs (250kg) or 1000 lbs (456 kg), plus the self weight of the hoist which will based on the travel distance and the optional features included. The maximum travel distance is 40 feet / 12 meters. Special travel distance requirements are available as an option.